Operation – Dimplex Fireplace DFG3033 User Manual
Page 12
12
www.dimplex.com
independent frequencies to
prevent interference with other
units.
Battery Installation
Depress tab on the battery
1.
cover on the back of the
remote control and remove
battery cover (Figure 6).
Install two (2) aaa batteries
2.
into the remote control
(included).
Ensure child lock is in the
3.
“unlocked” position (Figure 6).
Replace the battery cover.
4.
!
NOTE: When the “baT”
Operation
battery must be recycled
or disposed of properly.
Check with your Local
authority or Retailer for recycling
advice in your area.
Initializing/Reprogramming
the Remote Control
Plug cord into 120 volt wall
1.
outlet.
Ensure the Main on/off
2.
switch located in the switch
box on the fireplace in the
upper right hand corner is in
the
on position (Figure
5a).
set the 3 Position Manual
3.
Control (Figure 5b) to
the
Remote position (left
position).
Press and hold the
4.
Initialization button on the unit
(Figure 5C).
While holding the Initialization
5.
button, press the Flame/
heat on/off button on the
remote control.
Release the Initialization
6.
button on the unit.
Press the Flame/heat on/off
7.
button to turn the Flame/
heat function on.
Figure 6
batteries
Child Lock
symbol is present on
the remote control it is
recommended to replace the
batteries promptly, to maintain
full functionality of the remote/
fireplace. The remote control
has a battery backup time of
only several hours.