Dimplex Fireplace DFG3033 - Manual (Page 16)

16 www.dimplex.com
Maintenance
Light Bulb Replacement
Allow at least five (5) minutes for
light bulbs to cool before touching
bulbs to avoid accidental burning
of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame. There are three (3)
bulbs under the ember bed, which
generate the flames and embers,
and two (2) bulbs above that
illuminate the firebox interior.
Lower Light Bulb
Requirements
Quantity of three (3) clear
chandelier or candelabra bulbs
with an E-12 (small) socket base,
60 Watt rating. Example: GE
60bC or Philips 60 CTC.
Do not exceed 60 Watts per
bulb.
Helpful Hints: It is a good
idea to replace all light bulbs at
one time if they are close to the
end of their rated life. Group
replacement will reduce the
number of times you need to
open the unit to replace light
bulbs.
To access the lower light bulb
area:
Carefully remove the front 1.
upper bulbs
glass assembly. be aware
that some of the glass media
may fall out of the tray (Figure
9).
Empty the tray of glass
2.
media.
CAUTION: handle glass
media with care as some pieces
may have sharp edges.
Lift the tray up and remove 3.
from firebox.
Pull flicker rod towards the
4.
motor and bend gently to
remove the opposite end from
the support bracket (Figure
10).
Remove flicker rod from
5.
motor (see Figure 10).
unscrew bulb(s) counter
6.
clockwise.
Figure 9
Flicker rod
Glass media
and tray
Front Glass
assembly