K-Patents PR-23 for K-Patents Appendix - Manual (Page 8)

Document/Revision No. IM-GB-PR23-VACCINES: Rev. 1.01 Effective: November 1, 2013
8
Appendix to the Instructions Manual PR-23
2.2 System components
2.2.1 Checklist of components
1 Pharma Refractometer Sensor PR-23-AC-62-HSS-SC-EP calibrated with raw
measurement data refractive index (n
D
) and temperature (T)
2
2a
Indicating transmitter DTR-M/U-GP-SC that calculates and displays the process liquid
concentration based on the refractive index and temperature, installed in a stainless steel
enclosure that contains a key
3
3a
Table top stand PR-7603-SS for Indicating transmitter,
contains a set of two M5x10 A2 DIN 912 screws
4 Wall mounting screws kit for mounting the Indicating transmitter DTR on the wall
5 Interconnecting cable between transmitter and sensor PR-8230
6 PR-8820 Crossover cable for Ethernet connection between Indicating transmitter and
computer, length 5 m (16 inch), contains cable gland for enclosure connection
7
7a
7b
Table top stand PR-7605-SS with an integral support rod and
2.5” Sanitary Clamp for the Pharma Refractometer Sensor PR-23-AC-62-HSS
contains a M5x16 A4 DIN 912 screw
8 Pharma Mini Flow Cell PMFC-HSS
9 PR-9244-USP O-ring for the Pharma Mini Flow Cell, 22.2x3.0 EPDM
10 two sets of PR-9235 0.5” Sanitary Clamp for the Pharma Mini Flow Cell connection
11 two sets of PR-9236-USP Sanitary gasket EPDM for the 0.5” Sanitary Clamps
12 two sets of PR-9237 0.5” Sanitary ferrule (lenght 1.5 cm) for the inlet and outlet hose
connections and Pharma Mini Flow Cell
13 Universal sample holder PR-1012
14 R.I. Liquid set PR-2300, consists of Cargille Certificate for the liquids
15 Memory stick with CC-11 Computer Communication software