Vertex Standard eVerge EVX-531 - Manual (Page 28)

EVX-530 S
EriES
O
pErating
M
anual
26
a
dVancEd
o
pEratIon
s
pEEd
ch u
p
/d
oWn (EVx-534 & EVx-539)
Press and hold the assigned PF key to cause the radio
to begin stepping (repeatedly) upward or downward
through the channels.
prI-1
(EVx-534 & EVx-539)
Press, (or press and hold), the assigned PF key to re-
call the pre-programmed Priority Channel (Priority-1)
by your Vertex Standard dealer directly. The “P1”
will appear at the upper right corner on the display.
prI-2
(EVx-534 & EVx-539)
Press, (or press and hold), the assigned PF key to
recall the pre-programmed Priority Channel of the
current group (Priority-2) by your Vertex Standard
dealer directly. When PRI-2 channel is recalled, the
“P” icon will appear on the display.
prI-2 s
Et (EVx-534 & EVx-539)
Press, (or press and hold), the assigned PF key to
toggle the current channel to the priority channel 2
“enable” and “disable”. When PRI-2 channel is re-
called, the “P” icon will be indicated on the display.
prI-2 d
IsaBlE (EVx-534 & EVx-539)
Press (or press and hold) the assigned PF key, the
display indicates “PRI2 DI” briefly, and disable the
priority channel 2 of the group temporarily.
Press again, (or press and hold again), the assigned
PF key, the display indicates “PRI2 EN” briefly, and
enabling the priority channel 2 of the group.
d
IrEct
ch 1
to
ch 4
(EVx-534 & EVx-539)
Press, (or press and hold), the assigned PF key to
recall the pre-programmed channel by your Vertex
Standard dealer directly.
d
IrEct
ch E
ntrY (EVx-534 & EVx-539)
You can call the desired channel directly using this
function:

Press, (or press and hold), the assigned PF key.
A tone will sound, and the current group/channel
will appear on the display.
 In the EVX-534, select the desired digit of the
group number and channel number using the
[A]/[B] keys, then change the number using the
SIDE-1/SIDE-2 buttons.
In the EVX-539, enter the desired group number