Vertex Standard eVerge EVX-531 - Manual (Page 17)

EVX-530 S
EriES
O
pErating
M
anual
15
o
pEratIon
operating channels are selected by the Program-
mable key and the Channel Group is selected by
the CH Selector knob. For further details, contact
your Vertex Standard dealer.
 Rotate the VOL/PWR
knob to set the volume
level. If no signal is
present on the analog
channel, press (or press
and hold) the Program-
mable key (assigned to
the “sql oFF” func-
tion; background noise
will now be heard, and
you may use this to set
the VOL/PWR knob for
the desired audio level. Press (or press and hold)
the Programmable key again to quiet the noise
and resume normal (quiet) monitoring.
The Channel Announcement Feature
works as described below
(1) In the EVX-534/-539 radio:
The maximum number of channels is 512 (32
channels maximum per group). The radio an-
nounces the channel number digit by digit.
For example, “Channel 1” is announced as
“one” and “Channel 10” is announced as “one
zero”.
(2) In the EVX-531 radio:
The maximum number of channels is 32 (16
channels maximum per group). The radio an-
nounces Channels 1 - 9 by digit, while Chan-
nels 10 - 16 are announced by number.
For example, “Channel 10” is announced as
“ten” and so on.
 To transmit, monitor the
channel and make sure it
is clear.
Press and hold the PTT
switch. Speak into the
microphone area of the
front panel grille in a normal voice level. To re-
turn to the Receive mode, release the PTT switch.