Vertex Standard eVerge EVX-531 - Manual (Page 10)

EVX-530 S
EriES
O
pErating
M
anual
8
Belt Clip Installation and Removal
B
EForE
Y
ou
B
EgIn
 To install the Belt Clip: align
the Belt Clip to the groove of
the Battery pack, then press
the Belt Clip downward until it
locks in place with a “Click.”
Belt Clip Tab
 To remove the Belt Clip: use a
flat head screw driver to press
the Belt Clip Tab away from
the battery pack to unlock the
Belt Clip, then slide the Belt
Clip upward to remove it.
MIC/SP CAP Installation
Install the MIC/SP cap with the
supplied screws.
 Use only the supplied screws
when install the MIC/SP cap.
 This radio does not keep the
submersible Rating (IP57: 1
meter / 30 minutes) when the
MIC/SP cap is not installed
in the MIC/SP jack.