Vertex Standard eVerge EVX-531 - Manual (Page 26)

EVX-530 S
EriES
O
pErating
M
anual
24
and “WHISP OFF” briefly.
Vox
Press, (or press and hold), the assigned PF key to
activate the VOX function; allowing hands-free, au-
tomatic activation of the transmitter, based on voice
input into the microphone. You may disable the VOX
function temporarily by pressing the PTT switch.
Press again, (or press and hold again), the assigned
PF key to resume normal operation.
In the EVX-534/-539, 1) when the VOX function is
activated by operation from the external equipment,
a small dot (“.”) will be indicated at the bottom right
of the display, 2) when the VOX function is “on” and
“off”, the display indicates “VOX ON” and “VOX
OFF” briefly.
Vox s
Et (EVx-534 & EVx-539)
You can manually adjust the VOX Gain using this
function:

Press, (or press and hold), the assigned PF key. A
tone will sound, and the current VOX Gain level
will appear on the display.
 Press the [A]/[B] button to select the desired
VOX Gain level.
 Press the [D] key to store the new setting. The
display indicates “- SET -” briefly, then reverts to
the normal channel indication.
You may cancel the new setting by pressing
the [C] key. In this case, the display indicates
“- CANCEL -” briefly.
Vox a
ntI
-t
rIp
Press, (or press and hold), the assigned PF key to
toggle the VOX Anti-Trip feature “On” and “Off”.
When the VOX Anti-Trip feature is set to “On”, the
transceiver does not activate the transmitter section
from the receiver audio or own beep sound.
In the EVX-534/-539, when the VOX Anti-Trip fea-
ture is “on” and “off”, the display indicates “ATRP
ON” and “ATRP OFF” briefly.
E
mErgEncY
The EVX-530 series includes an “Emergency” fea-
ture in either analog or digital modes, which may be
useful for alerting another party monitoring on the
same frequency as your transceiver’s channel.
a
dVancEd
o
pEratIon