Kleenmaid LWG74 Revision 5 Installation - Manual (Page 9)

Installing the Washer
38910 7
Sink Installation:
For this type of installation, use the beaded tie-down
strap (supplied in accessories bag), or use a large wire
tie (available from your local hardware store) and
secure the drain hose to the cabinet top hinge. See
illustration. This will prevent the drain hose from
dislodging during use.
We recommend leaving the standpipe adapter on the
drain hose for this type installation.
In the Wall Installation:
For installations of this type, the drain hose MUST be
secured to one of the inlet hoses using the beaded tie-
down strap from accessories bag.
NOTE: End of drain hose must not be below height
of cabinet top.
Laundry Tub Installation:
For this type of installation, the drain hose MUST be
secured to the stationary tub to prevent hose from
dislodging during use. Use the beaded tie-down strap
(supplied in accessories bag) to secure hose.
We recommend leaving the standpipe adapter on the
drain hose for this type installation.
W177IE1A
DRAIN HOSE
TIE-DOWN STRAP
OR WIRE TIE
CABINET TOP
HINGE
W329IE2A
TIE-DOWN STRAP
(Tape if necessary)
STANDPIPE
ADAPTER
W178IE1A
TIE-DOWN
STRAP
(Tape if necessary)