Kleenmaid LWG74 Revision 5 Installation - Manual (Page 5)

38910 3
Installing the Washer
Step 1:
Remove the Shipping Brace and Shipping
Plug
NOTE: Install dryer before washer. This allows
room for attaching exhaust duct.
Remove the shipping brace from under the lid. The
plastic shipping plug will be released from the base of
the washer when removing the cardboard base from the
washer.
NOTE: Do not tilt washer to front or sides when
moving.
The shipping brace and plug should be saved and must
be reinstalled whenever washer is moved or transported
to a new location. This will prevent damage to washer
components.
NOTE: See your Use and Care Guide for
instructions on reinstalling shipping brace and
shipping plug.
Step 2:
Wipe Out Inside of Washtub
Prior to first wash, use an all purpose cleaner or a
detergent and water solution and a damp cloth to
remove shipping dust from inside of washtub.
W405IE1B
SHIPPING
BRACE
W373IE0A
SHIPPING
PLUG
W371IE0A