Kleenmaid TO600X - Manual (Page 8)

Instructions for use, installation and connection 8
Use of oven
Alternatives with the oven on:
•
Changing or setting the oven temperature
(d3-1)
•
Changing or setting oven operation time (d4-1)
•
Changing or setting end of oven operation
(d4-2)
•
Changing or setting meat probe temperature (d4-
3) if the meat probe is connected
Alternatives with the oven off:
•
By using the food selection sensor (1) or mode
selection sensor (2) you may select the type of
food (1) or function mode (2), and you may
change or set the oven temperature (d3-1), oven
operation time (d4-1), end of oven operation (d4-
2), meat probe (if the type of food or function
mode had been selected before) (d4-3) alarm
timer (d4-4) and the time of day (d4-5).
•
changing or setting the alarm timer and the
current daily time (d4-4).
Setting the time of day
•
After the appliance is connected to the mains
the display (d4-6) flashes »12.00« and the
symbol (d4-5).
•
By touching the sensors (4a/4b) you may set
the exact daily time. Approximately 5 seconds
after the setting is finished the symbol (d4-5)
goes off and the display (d4-6) indicates the
correct daily time.
Changing the current daily time
The time of day may be changed at any time
(except when the end of operation mode (d4-2) is
activated) by doing the following:
•
Touch the selection sensor (4) and select the
current time selection mode ((d4-5) is flashing).
•
by means of sensors 4a/4b set the current time
(symbol (d4-5) and the time displayed are
flashing (d4-6))
•
after 5 seconds the display indicates (d4-5)
correct current time (symbol (d4-5) goes off).
•
in case of power failure shorter than 1 minute,
the current daily time remains unchanged.
Oven illumination
•
When the oven is on, the lamp is also on,
regardless of the operation mode.
•
If the oven is off, touch the sensor (1) and select
the symbol "Light" (1), then touch the light
ON/OFF sensor (5) turn the lamp on. Touching
the ON/OFF sensor again will turn the lamp off.