Kleenmaid TO600X - Manual (Page 7)

Instructions for use, installation and connection 7
General setting options of oven control
•
Sound signal volume
−
When no other function is active it is possible
to set the sound signal volume by touching the
sensor (4b). The display (d4-6) indicates
symbols of 4 volume levels.
•
Sound signal duration:
−
oven operation period sound signal (d4-1), end
of oven operation (d4-2) and meat probe (d4-3)
last 7 minutes;
−
alarm timer sound signal (d4-4) lasts 3
minutes
−
After the expiry of the indicated time the sound
signal goes off automatically.
•
Each touch of the sensor is accompanied by
a beep.
• Increasing the speed of the display setting.
Pressing the sensor for a period of 5 seconds
continuously can increase the speed of the
displayed setting.
• Simultaneous pressing of (-) and (+) sensors
(3a/3b) ali (4a/4b)
Resets the settings to “0”, except for the
temperature setting display (d3-1) which is
changed to 30°C, and the end of operation
sensor (d4-2) which changes to indicate the time
of day.
In case the ON/OFF sensor (5) is not pressed
within 5 seconds, all settings are reset
automatically, except for the time of day and the
alarm timer.
In case of power failure less than 1 minute long,
all settings remain unchanged and the oven
resumes normal operation (if activated).