Kleenmaid TO600X - Manual (Page 6)

Instructions for use, installation and connection 6
Prior first use
Oven
Take all the accessories out of the oven and clean
it with warm water and mild detergent. Never use
aggressive cleaners as they may cause scratches!
When you first use your oven, the oven will need to
‘settle’. That is, it needs to burn off production
residues and dust. The metal used will also
expand slightly when first used. You may
experience some crackling sounds, a strong smell
and an emission of smoke.
This is perfectly normal.
We advise you to anticipate this ‘settling’ prior to
use. To ‘settle’ the oven, using an empty oven
select fan forced and set at a temperature of 250º.
Allow the oven to ‘settle’ for ½ hour, and then turn
to traditional mode and heat for a further ½ hour.
During this procedure the room should be well
ventilated.
Tips for the use of the oven
•
If possible use dark, silicone coated or enamel
baking pans, because of their excellent thermal
conductivity.
•
Preheating of the oven is necessary only if
recommended by the recipe or if recommended
in the Baking Tables.
Heating of an empty oven consumes a lot of
energy. Save it by baking several pizzas or cakes
consecutively, one after the other, while the oven
is still warm. Towards the end of baking, the oven
may be switched off about 10 minutes before
completion, thereby making use of the remaining
residual heat.