Panneau de commandes ml, Ml -functiepaneel, Funktionspanel ml – Kemppi Promig 520R User Manual
Page 17: Ml control panel, Ml kontrol panel, Ml funksjonspanel, Ml funktionspanel, Ml-ohjauspaneeli
PROMIG 520R, 120R / 0544 – 17
© KEMPPI OY
MIG
1-MIG
S32
P33
R32
P32
R31
P31
S31
S34
S35
S36
R34
R33
S33
4.2. ML CONTROL PANEL
MIG basic operations
Welding method selection (S31): no function
Control mode selection (S32): local, remote
Local controls: wire feed speed/welding power/(R31), welding voltage (R32)
Controls for MIG welding dynamics (R33)
Digital displays: wire feed speed (P31), current (P32), voltage (P33)
Retrieval of last actual welding values (S33)
SYNERGIC operations
SYNERGIC mode switch S34
Normal MIG welding with independent adjustments for wire feed speed (R31)
and voltage (R32).
SYNERGIC MIG: MIG welding with parameters which are pre-set according
to filler wire (S35, S36). Welding parameters are adjusted with adjustment
potentiometers for welding power (R31) and arc length (R32).
SYNERGIC PULSEMIG: Pulsed MIG welding with parameters which are pre-set
according to filler wire (S35, S36). Welding parameters are adjusted with adjustment
potentiometers for welding power (R31) and arc length (R32).
Gun cable length compensation (R34)