Delta LTL2000S User Manual
Page 41
DELTA
LTL2000S(Q) Retroreflectometer
37
APPENDIX C
Print outs
Result Printout
Examples of result printouts showing the measured values, the Measurement Id and the number
of measurements with this id, the number of measurements used to calculate the mean value, the
date and time the measurement was taken, the number of data in the data log, the measurement
status and the instrument serial number.
Note that one or more of the shown data can be left out depending on the selected operation
mode.
If the status is other than 0 then there was a special condition detected during the measurement
and this will also be printed.
Rl Calibration Printout
The printout after a Rl Calibration measurement showing the selected Rl Normal value. The date
and time for the calibration and the status for the measurement.
Qd Calibration Printout
The printout after a Qd Calibration measurement showing the selected Qd Normal value, the date
and time for the calibration and the status for the measurement.