Delta LTL2000S - Manual (Page 13)

DELTA LTL2000S(Q) Retroreflectometer 9
If the key is pressed the calibration result is printed.
In the example above the Qd function is now calibrated to a Qd value of 215. If an error is
detected during the calibration procedure then the display will indicate this.
Rl Calibration:
See Rl calibration page 6.
Figure 2. How to place the calibration normals.
The normal must be placed
with this side up for the
different calibrations.
Guidance pin
placed in notch
Rail
Guidance pins
Rl calibration (step 4
in the detailed de-
scription page 5)
Qd calibration (step 1
in the detailed de-
scription page 6.)
Zero calibration for
the Rl calibration (step
1 in the detailed de-
scription page 5).