Kemppi Pulse TCS - Manual (Page 28)

EN
3.6.6 Save and Panel Lock button
SAVE
7.
Use this button for saving a memory channel or locking the control panel.
Short Press: Saves the selected memory channel.
Long Press: Locks the control panel so that no parameter changes are allowed.
3.6.7 Crater Fill and Hot Start button
8.
Use this button to select Crater Fill or Hot Start functions.
3.6.8 Control display
ROBOT
PANEL
CONTROL
9.
These indicators show where the welding parameter values come from.
• ROBOT: The welding parameter values come from the welding robot.
• PANEL: The welding parameter values come from the welding machine's memory
channel.
3.6.9 Power control knob
POWER
10.
Use this knob to adjust the wire feed speed or welding power in either Basic, Synergic or
Pulsed MIG/MAG processes. Adjustment can be made before or during the arc process. This
control knob can also be used for adjusting additional parameter values when selected.
3.6.10 Voltage control knob
U
11.
Use this knob to adjust the arc length, welding voltage and welding parameter values. You can
make the adjustments before or during welding.
26
KempA
rc P
ulse
TCS / © Kemppi O
y / 1204