Preface – Kemppi Pulse 3000 MVU User Manual

Page 5

PreFaCe

1.1

general

Congratulations on your choice of the Kempact Pulse™ series power source. Reliable

and durable, Kemppi products are affordable to maintain, and they increase your work

productivity.
This user manual contains important information on the use, maintenance, and safety of

your Kemppi product. The technical specifications of the device can be found at the end of

the manual. Please read the manual carefully before using the equipment for the first time.

For your safety and that of your working environment, pay particular attention to the safety

instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi

dealer, or visit the Kemppi Web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.

important notes

Items in the manual that require particular attention in order to minimise damage and

personal harm are indicated with the

’NOTE!’

notation. Read these sections carefully and follow

their instructions.

1.2

PrODuCt intrODuCtiOn

The Kempact Pulse 3000 MVU is a compact MIG inverter suitable for repair and installation

use, and for light and medium industrial use.

1.3

general saFetY instruCtiOns

Kemppi welding equipments conform to international safety standards. Safety is an important

issue in equipment design and manufacturing. Therefore, Kemppi welding solutions are

unparalleled in safety. There are, however, always certain hazards involved in using welding

equipment. Therefore, to ensure your personal safety and the safety of your working

environment, carefully read the safety instructions below and respect them.

use of personal protective equipment

• The arc and its reflecting radiation damage unprotected eyes. Shield your eyes and

face appropriately before you start welding or observe welding. As the welding current

increases, the welding face screen lens darkness should also increase.

• Arc radiation and spatters burn unprotected skin. Always wear protective gloves,

clothing and footwear when welding.

• Always wear hearing protection if the ambient noise level exceeds the allowable limit

(e.g., 85 dB).

general operating safety

• Exercise caution when handling parts heated during welding. For example, the tip of

the welding torch or gun, and the end of the welding rod and the work piece. The

temperature of items burn unprotected skin.

• Never wear any welding device on the shoulder during welding and never suspend it by

the carrying strap during welding.

• Do not expose the machine to high temperatures, as this may cause damage.

• Keep intermediate and earth return cables as close to each other as possible throughout

their length. Straighten any loops in the cables as this limits inductive effects on welding

performance. This also minimizes your exposure to harmful magnetic fields, which may,

for example, interfere with a pacemaker.

• Do not wrap the welding cables around your body.

• In environments classified as dangerous, only use S-marked welding equipments with

a safe idle voltage level. These work environments include, for example, humid, hot or

small spaces, where the user may be directly exposed to the surrounding conductive

materials.

• Do not use arc welding equipment for pipe thawing.

Kempac

t P

y / 1026