Kanguru QSX - Manual (Page 7)

7
2.2.1 eSata connection
When connecting the QSX via eSATA, it may not appear in your computer right away. The Kanguru
QSX is hotswap compatible. However, based on your eSATA host controller, several tasks may need
to be performed in order to view the QSX.
Please do the following to rescan for newly connected eSATA devices:
Right click on the 1. my computer icon and click manage.
The Computer Management window appears. From the list on the left side of the window, select 2.
device manager.
On the right side of the window, there will be a list of devices. Right click on your computer; it 3.
should be at the very top, and then select Scan for hardware changes.
Wait for the scan to complete and then check the 4. my computer screen again to see if the
Kanguru QSX has been recognized by the computer. The QSX may appear as one or two hard
drives depending on the storage mode it is set in.
If your computer still cannot recognize the Kanguru QSX, the computer may need to be restarted.
Note: For ease of use, the e-Flash comes with a 3 rd party application HotSwap!. HotSwap! allows you
to easily add and remove eSATA devices similarly to Windows Add/Remove hardware wizard. For
more information on using HotSwap!, please see section 2.6 Using HotSwap!, p.12.
Basic Operation