Kanguru Bio Slider II - Manual (Page 5)

5
l Windows 98SE with Device Driver
l Window 2000/ME and Windows XP
System Requirements
A. Plug- in the BioSlider II only after the Windows 98SE driver has been installed.
(Windows 98 Users Only)
B. Be sure you have Windows 2000 Service Pack 4 or Window s XP SP 2
installed from Microsoft Update.
Before Use
A. Keep the BioSlider II away from heat, direct sunlight, and moisture. Do not
bend, flex, or drop the BioSlider II
B. To pre vent data loss and/or damage to the BioSlider II, do not remove the
BioSlider II from the USB port while data is transferring
C. Keep the sensor away from sharp objects, such as keys and knives
D. Do not store the BioSlider II in dusty, dirty areas or conditions
E. Do not paint the BioSlider II. Paint will clog the parts and prevent proper
operation
F. On the side of the BioSlider II is a small dipswitch, which allows you to
protect data from accidental erasure. The driver will not allow copying to or
erasing of the contents on the drive. You may slide the switch from the left
(unlocked) position to the right (locked) position.