Kanguru Bio Slider II - Manual (Page 10)

10
Chapter 3: Starting the USB BioSlider II
The BioSlider II is a removable device to your PC. Plug it into a USB
port before using it.
NOTE: You have to click “Unplug or Eject” icon in the Windows toolbar before
removing the USB BioSlider II from the system. Windows 98SE does not have this
function (icon), so you must be careful when unplugging the BioSlider II in Windows
98SE. It is your responsibility to make sure all data transfer has been completed
before the device is unplugged. The access LED in U SB BioSlider II will stop
flashing after data is transferred. This is a good indication that you can unplug the
BioSlider II safely.
Fingerprint Enrollment Adaptation
In order to maximize access security and to minimize the possibility of incorrect
ident ification, obtaining accurate fingerprint images is crucial for the enrollment
process.
The enrollment process consists of installing a complete digital image of your
fingerprint pattern from consecutive scanned images.
To obtain the best result, select the section of your finger which will present unique,
clear rib and valley patterns .
Step 1. Place your finger towards the top of the BioSlider II; close to the USB
connection