Kanguru Bio Slider II - Manual (Page 17)

17
finger drive ring and the sensor surface, follow these steps:
1. Unplug the BioSlider II from the computer.
2. Use any clean soft cloth with a household , kitchen or window cleaner.
Do NOT use chlorine-based cleaners, non-chlorine bleach, or chlorine-based
bathroom or mildew cleaners. Chlorine based cleaners will not necessarily affect
the functionality of the finger print sensor; however they can discolor the
BioSlider II and could damage the circuitry surrounding the fingerprint sensor.
Do NOT use any solvents, such as acetone, paint thinner, turpentine, etc.
3. Lightly wet a clean cloth with one of the cleaners mentioned above (it must not be
soaking or dripping wet). Gently rub the sensor surface with the cloth, slowly
rotating the cloth to ensure that clean cloth is constantly used on the sensor
surface.
4. After cleaning, gently dry the sensor surface with a clean soft dry cloth.