Kanguru Bio Slider II - Manual (Page 11)

11
Step 2. Slide your finger down towards the other end of the BioSlider II
Step 3. Apply just enough pressure with your finger so as to obtain a sharp image by
the scanner.
It is highly recommended to use the index finger, as it will present the be st
fingerprint image. In addition, enroll the identical fingerprint image more than
once to ensure successful verification, and to best capture the characteristics of
user’s fingerprint image.
First time Enrollment Procedure s
1. Plug in the BioSlider II to any USB port available in your PC.
2. Open the “FP Software” drive and click “Setup”
3. Enter the serial number provided in your package and click “ok” after completed.
Note: You must use all capital letters. Also make sure to use 0’s and O’s when
appropriate.
4. Enroll your fingerprint by clicking one of the fingers.