beautypg.com

Using the rs-422 interface card – JLCooper BTX Eclipse User Manual

Page 11

background image

11

Using the RS-422 Interface Card

Installing the RS-422 Interface
Connecting the Eclipse BTX is quite straightforward. The Eclipse
BTX with the RS-422 Interface connects to a RS-422 port.


1. Install the MCS-3000 Series RS-422 Interface in Slot 1.
2. Connect the included power supply to the Eclipse BTX.
3. Connect the Eclipse BTX to an RS-422 port.

Configuring the RS-422 Interface
To configure the MCS-3000 Series RS-422 Interface Card for use
with a computer based application:

1.
2.

3.

4.

Remove power from the Eclipse BTX.
Remove the MCS-3000 Series RS-422 Interface Card from
the Eclipse BTX.
Set the 5 jumpers found on the card to the “Computer”
position.
Insert the MCS-3000 Series RS-422 Interface Card into
Slot 1 of the Eclipse BTX.

See also other documents in the category JLCooper Equipment: