JLCooper eBOX GPI8 - Manual (Page 31)

31
Password
If you check the Use Password checkbox, you can define an eight
character password that will be sent as part of every message to
and from the eBOX GPI8. This must match the password set in
the eBOX GPI8 hardware. Refer to the eBOX GPI8 manual for
setting up the password.
Keysets
This software uses keysets like our control surface software.
Different keysets can be set up for different applications, for
example, a keyset for Pro Tools and another one for FCP. In Live
Mode the eBOX GPI8, software will automatically use the correct
keyset for the front application.
To create a new keyset, go to New Keyset in the File menu. In the
dialog that opens up, navigate to the application that the keyset will
be used with, such as Pro Tools, FCP, etc. and click on Open.
Use the Keysets menu to switch between the various keysets that
you have created.