JLCooper eBOX GPI8 - Manual (Page 10)

10
Resetting eBOX GPI8 Settings
The eBOX GPI8 settings can be forced to factory defaults by using
the reset button. The reset button is located behind the front panel.
It can be accessed via the small, unmarked hole to the right of the
Port 4 Send LED. The arrow in the picture below shows the
location of the hole for the reset button.
To reset the eBOX GPI8 to factory defaults, simply press the
button with a long, thin object such as a paper clip and turn the
power on. The reset button can be released after the 5 Send and 5
Receive LEDs stop flashing.
The eBOX GPI8 factory defaults are:
IP Address 192.168.254.102
Subnet Mask 255.255.255.0
Gateway Address 192.168.254.198
TCP Port 23
Destination IP Address 192.168.254.103
Destination TCP Port 5000
Password password
eBOX GPI8 Settings After Reset
After the eBOX GPI8 settings are reset in this manner, you must
power cycle the eBOX GPI8 to load those settings.