JLCooper eBOX GPI8 - Manual (Page 14)

14
eBOX GPI8 Settings
This section allows you to change the operational settings of the
eBOX GPI8 Ethernet interface. These settings are identical to the
settings that appear on the configuration web page.
Device IP Address
IP address of this eBOX GPI8 when SW1, SW2 and SW3=On.
Subnet Mask
The mask is a binary pattern that is matched up with the IP address
to turn part of the host ID address field into a field for subnets.
Gateway Address
IP address of gateway router that connects to other networks.
Port Number
TCP port of this eBOX GPI8 when SW1, SW2 and SW3=On.
Destination IP Address
IP address of remote eBOX GPI8 when SW1, SW2 and SW3=On.
This is used when eBOX GPI8 is configured as a client
(SW7=On).
Destination Port Number
TCP port of remote eBOX GPI8 when SW1, SW2 and SW3=On.
This is used when eBOX GPI8 is configured as a client
(SW7=On).
Password
Eight character alphanumeric password that is embedded in the
Ethernet packet that prevents unauthorized eBOX GPI8es from
passing unintended packets. If the password protection feature is
enabled (SW6=Off) on either eBOX GPI8, then both eBOX
GPI8es must have the same password.
Baud Rate
This parameter is not used in the eBOX GPI8.
Parity and Parity Type
This parameter is not used in the eBOX GPI8.
Serial Time Out
This parameter is not used in the eBOX GPI8.