Practical procedure for restoration with ips e.max, Die – shade determination – Ivoclar Vivadent IPS e.max Clinical Guide User Manual
Page 16
16
Practical procedure for restoration with IPS e.max |
Die – Shade determination
Die – Shade determination
The IPS Natural Die Material Shade Guide is used to determine the die shade.
Determining the die shade at the end of the preparation is a very important step for the fabrica-
tion of all-ceramic restorations. Especially with severely discoloured preparations this is of ut-
most importance. Only if the dentist determines the shade of the preparation and considers it
in the selection of the restorative material, may the desired esthetics be achieved in a targeted
fashion.
Shade determination on the prepared tooth/die
– Carry out the shade determination at daylight.
– Carry out the shade determination on the prepared tooth.
– Use the IPS Natural Die Shade Guide.
Take the impression as usual:
– Silicone (e.g. Virtual
®
)
– Polyether
– Digital impression
Die shade
Cementation material
Restoration shade
Desired
tooth shade
Die – Shade determination
Temporary restoration
Function, phonetics and esthetics of the permanent restoration are predefined
and may still be adapted any time. For this essential treatment step, the Telio
®
product system provides a multitude of application options.
Important:
The temporary restoration is cemented with a temporary, eugenol-free cement, such
as the dual-curing Telio
®
CS Link.
LS
2
ZrO
2
FAP
Fluor-Apatit
Zirkoniumoxid
Lithiumdisilikat
LS
2
ZrO
2
FAP
Fluor-Apatit
Zirkoniumoxid
Lithiumdisilikat
Impression