Ivoclar Vivadent IPS Empress Esthetic - Manual (Page 37)

37
Wax-up
A fully anatomical wax-up should be fabricated for veneer restorations. You can use any organic waxes that burn out
without leaving residue. Also, ensure a wall thickness of at least 0.5 mm. For better distinction, a basic wax in a different
colour can be used.
For better distinction, a basic wax in a different colour is recommended. Fully anatomical wax-up.
Veneers with sprues in place. Sprued veneers on the 200-g investment ring system.
For the processing steps on investment, preheating, pressing and divesting/separation, as well as die fabrication with
IPS Natural Die Material, please refer to pages 25–31.
Once the restoration has been pressed using the
IPS Empress Esthetic ingot selected according to the
individual patient situation, they are placed on the
corresponding working model.
Veneers on the working model after finishing.