Ivoclar Vivadent IPS d.SIGN - Manual (Page 19)

19
IPS Margin Sealer, 20 ml
This separating liquid is used
to seal the gypsum die when
fabricating a ceramic
shoulder with IPS d.SIGN
Margin materials.
Components: Wax dissolved
in hexane
Other build-up liquids or separating liquids must
not be used. They may contain organic additives
that do not burnout at the firing temperatures
used for IPS d.SIGN and leave a residue that will
cause discoloration in the ceramic.
Warning:
Hexane is highly flammable and detrimental to
health. Avoid contact of the material with skin and
eyes. Do not inhale the vapours. Keep the material
away from open fire.
Warning
Ethyl acetate is highly flammable. Keep material
away from open fire. Do not inhale the vapours.
IPS Model Sealer, 50 ml
This separator is used to seal
the pontic tissue areas and
interproximal contact area
when working with
IPS d.SIGN layering materials.
The IPS Model Sealer closes
the pores of the gypsum and
prevents the moisture in the
ceramic material from being
absorbed by the gypsum.
Components: Ethyl acetate,
nitro-cellulose, softener
IPS Ceramic Separating Liquid, 15 ml
This Separating Liquid is
used on areas that have
been sealed with either the
IPS Margin Sealer Liquid or
the IPS Model Sealer. Use of
this liquid will ensure a clean
separation between the
ceramic material and the
gypsum model and/or die.
Components: Paraffin oil
IPS d.SIGN Build-Up Liquid Optimum 1, 60 and 250 ml
Excellently suitable for
mixing IPS d.SIGN, with its
outstanding firing behaviour
and lowest possible
shrinkage. The materials are
easily suctioned off and
condensed and are
particularly suitable for the
manual reduction of
materials with the help of
instruments.
Components: Water, poly-
ethylene glycol (PEG), and
additives
IPS d.SIGN Build-Up Liquid Optimum 2, 60 and 250 ml
Excellently suitable for
mixing IPS d.SIGN, with its
properties that support the
build-up, as well as the
optimized firing properties
with low shrinkage. This
liquid is particularly suitable
for targeted material
application without
continuous suction.
Components: Water, poly-
ethylene glycol (PEG), and
additives