Shower details – Infloor Electric Cable Series 386 User Manual
Page 31
31 of 36
Copyright ©2014
Shower Details
Infloor Electric Cable
Factory Splice
Shower Curb
Tile
Thinset Mortar
Avoid sharp bends in cable
Master Bathroom (normal heat loss, framed floor construction)
Two zones, 120 volts: Two Cables
Vanity
Bath Tub
Shower
Toilet
Cable End
Cable End
Shower
Curb
Zone 1a
Zone 1b
Example of Cables only with (-W) on the nameplate label, where cable is
installed in a shower area and enters over the curb.
Install cables
at least 6” away
from toilet rings
Control
Floor Sensor
Wire Strap
See phase 3 for complete details and Cautions. This application into a shower area must
be verified by the local inspector or the authority having jurisdiction.
This manual is related to the following products: