Digimerge DHU104 User Manual

Page 83

Text mode
Original mode

Appendix 13: Setting Up Remote Viewing

DVR Information - Enter the
information specific to the
unit:
• Name - Enter a name for the
unit.

• IP / Domain Name - Enter
the IP address or Domain
Name for the System. This
will vary depending on setup
(Internal Network
Connection or External
Remote access through the
Internet).

• Port - Set to 6100 by default.

• User ID - Enter the USER
ID to connect to the system
(the USER ID is configured
on the System - i.e. ADMIN -
case sensitive).

• Password - The password
used to access the System
(i.e. The ADMIN password is
set to 1234 by default).

Camera Assign - Set each
camera to a portion of the
9-view window by using the
drop down menu selections.

ADD Button - Adds the site
to the Group.
OK Button - Accepts the
changes and Closes the
configuration Window

Adding a Site (Individual Unit Configuration)