Digimerge DHU104 - Manual (Page 66)

58
Appendix 9: System Setup Tips
Appendix 9: System Setup Tips
There are several tips outlined below that will assist you in setting up your system:
Navigating within the System
Menu
• Open the MENU screen by pressing
the MENU button. Enter the password
if required.
• The Menu contains the following
options: Search, Archiving, Record
Start (Panic Recording), Sequence,
PTZ, System Setup, Record Setup,
Logoff, and Shutdown.
• Scroll through the options by pressing
the UP, DOWN buttons on the Front
Panel or Remote Control.
• To enter a sub-menu, select the option
and press the ENTER button. To exit a
SUBMENU, press the RETURN
button.
• To exit the MENU, press the RETURN
button.
Changing the Date and Time
Setting the correct date and time for your
system is important. Once the date and
time have been set correctly, it is highly
recommended that you format your Hard
Drive.
1. Open the MENU by pressing the MENU
button on the front panel of the system (or
on the Remote Control). Select the
SYSTEM SETUP Option and press the
ENTER button.
2. Select SYSTEM and press the ENTER
button.