Digimerge DHU104 - Manual (Page 72)

64
Appendix 11: Playing Recorded Video Data
Appendix 11: Playing Recorded Video Data
Search mode allows you to locate
previously recorded video by Date and
Time, or by Event Type.
Any days highlighted with GREEN
indicate that there is recorded video data.
The Date and Time will be displayed at
the bottom of the screen. A playback icon
will appear indicating that the unit is in
Playback mode.
• Press the Search Button on the front
panel or Remote Control
• Enter the User Name and Password (if
required).
• Use the Left / Right arrows on the Front
Panel or Remote Control to switch
between the Search By Time and
Search By Event screens.
Search By Time
Searches the system based on date and
time.
• Press the Enter button to access the
Calendar (on the left side of the screen)
• Navigate within the calendar using the
Arrow Keys on the front panel or remote
control.
• Once the date has been located, press
the Enter button to accept the date, and
to access the Time Search (on the right
side of the screen).
• Press and Hold the arrow keys to select
the Time (increments of 1 minute).
Pressing the button without holding will
increment 15 minutes.
• Press the Enter button to start the
playback. Press the Return button to
stop playback and return to the Search
By Time screen.
NOTE: The unit will continue to record data
while in Playback Mode.