Digimerge DHU104 - Manual (Page 31)

23
Camera Menu
COLOR SETUP
Displays the settings for Brightness,
Contrast, Tint and Color for individual
cameras.
• Press the ENTER Button and select a
camera, or double-click using the
mouse.
• Set the Brightness, Contrast, Tint and
Color for each camera. These settings
can be set to a range of
1(low)~100(high)
• Press the RETURN button to return to
the Camera Color Setup screen.
PTZ SETUP
PTZ Setup is for PTZ Type Cameras ONLY,
which are not included with this system. For
more information on PTZ Cameras, visit us
on the web at
www.digimerge.com
• ADDRESS - Select the physical address
location of the PTZ Camera (as
connected to the rear PTZ Control
Block. Refer to the appendices for
details).
• PROTOCOL- Select the Protocol for the
PTZ Camera. See the list of compatible
protocols below. Consult the Owners
Manual of the PTZ Camera for further
details.
• BAUDRATE - Setup for the PTZ
Communication Speed: (2400, 4800,
9600,19200, 38400 BPS).
Compatible PTZ Protocols:
Samsung (MRX-1000), Samsung(SCC641), Honeywell(SD1), Honeywell (GMC), Lilin(Fastdome), Fastrax(?),
GC(655N), D-MAX, Sunin DSC-230, Scan Dome-?, Vicon, Philips8560-700, Sensormatic, Panasonic(WV-CS850),
Panasonic(WV-CSR604), VRX-210 Kalatel(KTD-312), PELCO-D, PELCO-P, & Dynacolor(D7722).
Press to enter the Detailed PTZ
Properties screen.