Digimerge DHU104 - Manual (Page 29)

21
System Setup Menu
OSD (Onscreen Display)
• Motion Sensor Display - Turns the
display of the Motion Sensor to:
• Active: Display motion sensor of
motion detection area.
• Inactive: Display motion sensor
except motion detection area.
• Off: No display of motion sensor.
• Motion Color - Sets the motion
sensor color. When Motion is
detected on a channel, the moving
parts of the image will be highlighted
with colored squares (i.e. Blue
Squares).
• Language - Select the system
language.
MONITOR
• Sequence Dwell - Sets the cycle time
when the system is in Sequence
Mode (between 1~60 seconds).
• Alarm Pop-Up Mode - Set to ON/
OFF. Switches the screen display to
any channel when an Alarm is
detected.
• Alarm Pop-Up Dwell - Determines
the length of time that a channel is
displayed when an Alarm is detected
(between 1~60 seconds).
• Motion Pop-Up Mode - Set to ON/
OFF. Switches the screen display to
any channel when Motion is detected.
• Motion Pop-Up Dwell - Determines
the length of time that a channel is
displayed when Motion is detected
(between 1~60 seconds).