Digimerge DHU104 User Manual

Page 67

Appendix 9: System Setup Tips

3. Select the DATE AND TIME Menu. Change the settings by navigating with the UP/

DOWN/LEFT and RIGHT arrow keys. Set the following based on your local Time (and
Timezone), and set the current date for the
system.

• Date/Time - Sets the current system Date

and Time.*

• Date Format - Sets the Date Display

format (MM-DD-YYYY, YYYY-MM-DD,
etc.).

• Time Format - Sets the Time Display

format to either 12 or 24 hour display.

• Network Time Server Setup -

Synchronizes the system to the specified
remote time server. Select the SYNC
button to connect to the remote server and
synchronize the time. (may also use a time
server of the users choice).

• Timezone Setup - Selections for the local Time Zone (i.e. EST, CST, PST). The DST

(Daylight Savings Time) can be set to ON/OFF.

* NOTE: If the Date/Time is set into the past, a message will appear warning that
Overlapped date(s) will be erased.
** MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! **