Digimerge DHU104 - Manual (Page 14)

6
Display Modes
Display Modes
Initial Loading Sequence
• Press the POWER button located on
the front panel of the DVR to start the
unit.
• The DVR will perform a Hard Drive
check
• The unit will initially load to a quad
split-screen view.
Individual Camera Display
Each channel displays the Camera Name and
Recording Status:
: Record
: Pre Record
C: Continuous
M: Motion
A: Alarm
NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT
the drive. If you do not choose to format the HARD DRIVE, the drive will not be
detected by the system.
If you choose to FORMAT a drive in this way, the drive will no longer be readable
by a regular PC without using the HARD DRIVE VIEWER software included on the
CD provided with this unit.