ikan MD7 - Manual (Page 25)

25
18B
External Remote Control
140B
Connecting GPI Port (RJ-45)
Turning the monitor off is recommended before cable connection. Assignable
functions are listed below.
Function Name Description
SDI-1 Input Switches the input to SDI-1
SDI-2 Input Switches the input to SDI-2
HDMI Input Switches the input to HDMI
YPbPr Input Switches the input to YPbPr
CVBS-1 Input Switches the input to CVBS-1
CVBS-2 Input Switches the input to CVBS-2
CVBS-3 Input Switches the input to CVBS-3
KEY-
UP ▲
CURSOR UP on Menu Control.
KEY- DOWN ▼
CURSOR DOWN on Menu Control.
KEY- MENU Menu On/Off
KEY-ENTER Enter Button
Aspect Aspect On/Off
1:1 Scan On/Off 1:1 SCAN Function On/Off
H/V Delay On/Off H/V Delay Function On/Off
TC Display On/Off TC Display On/Off
ALM Display On/Off Audio Level Meters Display On/Off
Freeze On/Off Freeze Frame On/Off
Front Button LED On/Off Front Button LED On/Off.
Tally Red On/Off Tally Red LED On/Off
Tally Green On/Off Tally Green LED On/Off
141B
Backlight
Set the backlight intensity from 0 to 40. An LCD panel requires more than 30
minutes before mfinal monitor calibration.
142B
Front Button LED
Set front LEDs on/off status.