ikan MD7 - Manual (Page 24)

24
17B
SYSTEM
130B
131B
Function 1,2,3,4
Assigns a function to each function button. See FRONT section for detail.
132B
Backlight
Set the backlight intensity from 0 to 40. An LCD panel requires more than 30
minutes to settle to a new backlight value before final monitor calibration.
133B
Front Button LED
Set front LEDs on/off status.
134B
Font Button Lock
Locks front buttons not to work. Press and hold Menu button for 3 seconds to exit
from this mode.
135B
Update Firmware
Turns update mode on. Select Serial or USB port for update. After firmware
update, the monitor should be turned off/turned on, and Factory Default should be
loaded before use.
136B
Setup Load
Load monitor settings from Factory Default, User 1/2/3/4.
137B
Setup Save
Save current monitor setting to use later. Four settings can be saved.
138B
Firmware Version
This version number is required when you request for service.
139B
Operating Time
This indicates total hours that the monitor operated.