Recommended spare parts – Hypertherm Powermax30 XP Service Manual User Manual
Page 197
Powermax30 XP Service Manual 808150 Revision 1
197
8 – Parts
Recommended spare parts
Hypertherm recommends that service centers keep the following spare parts on hand for repairs because these parts are
critical or are usually exposed to heavy and repeated wear. You may find that you need to revise or expand this list for your
customers, based on the conditions and work environments in your region.
7
228210
Kit: CSA power cord with NEMA twist lock-style 240 V/20 A plug, 1-phase, 3.0 m
(10 feet)
8
228140
Kit: CE power cord, 1-phase, 3.0 m (10 feet) (plug not included)
8
428231
Kit: CCC power cord, 1-phase, 3.0 m (10 feet) (plug not included)
9
228143
Kit: Power cord strain relief
Kit Number
Description
Reference
428226
Kit: Current adjustment knob
228561
Kit: Ground clamp
428239
Kit: Work lead, 4.6 m (15 feet) (includes ground clamp)
428235
Kit: Power switch
428232
Kit: Control board
428233
Kit: Power board, CSA
428234
Kit: Power board, CE and CCC
428173
Kit: Solenoid valve
228688
Kit: Pressure switch
228106
Kit: Air filter/regulator with pressure switch
428237
Kit: Air filter element
428179
Kit: Replacement O-rings for torch body
428177
Kit: Duramax LT torch handle
428181
Kit: Duramax LT torch handle screws
428156
Kit: Torch trigger and spring
428182
Kit: Spring for torch trigger
428162
Kit: Torch start switch
228109
Kit: Torch cap-sensor switch
428174
Kit: Duramax LT hand torch assembly with 4.6 m (15 foot) lead
428176
Kit: Duramax LT torch lead, 4.6 m (15 feet)
128836
Thermal grease, 1/8 ounce
027055
Silicone lubricant, 1/4 ounce
Item
Kit number
Description