D-Link DFL-500 - Manual (Page 96)

DFL-500 User Manual
96
Sample DHCP settings
Viewing the dynamic IP list
If you have configured your DFL-500 NPG as a DHCP server, you can view a list of IP addresses that the
DHCP server has added, their corresponding MAC addresses and the expiry time and date for these
addresses. The DFL-500 NPG adds these addresses to the dynamic IP/MAC list and if IP/MAC binding is
enabled, the addresses in the dynamic IP/MAC list are added to the list of trusted IP/MAC address pairs. For
more information about IP/MAC binding, see
IP/MAC binding .
To view the dynamic IP list:
• Go to System > Network > DHCP .
• Select Dynamic IP List.
The dynamic IP list appears.
Example Dynamic IP list
System configuration
Go to System > Config to make any of the following changes to the DFL-500 NPG system configuration: