beautypg.com

Configuring the dfl-500 npg as a pptp gateway – D-Link DFL-500 User Manual

Page 67

background image

DFL-500 User Manual

67

PPTP VPN between a Windows client and the DFL-500 NPG

Configuring the DFL-500 NPG as a PPTP gateway

• Create a user group for your PPTP users.

See

Users and authentication

.

• Go to VPN > PPTP > PPTP Range .
• Select Enable PPTP.
• Enter the Starting IP and the Ending IP for the PPTP address range.
• Select the User Group that you added in step

Create a user group for your PPTP users.

.

• Select Apply to enable PPTP through the DFL-500 NPG.

See also other documents in the category D-Link Hardware: