D-Link DFL-500 - Manual (Page 81)

DFL-500 User Manual
81
Administration
This chapter describes how to use the web-based manager to administer and maintain the DFL-500 NPG. It
contains the following sections:
•
System status
•
Upgrading the DFL-500 NPG firmware
•
Displaying the DFL-500 NPG serial number
•
Backing up system settings
•
Restoring system settings
•
Restoring system settings to factory defaults
•
Changing to Transparent mode
•
Changing to NAT/Route mode
•
Restarting the DFL-500 NPG
•
Shutting down the DFL-500 NPG
•
System status monitor
•
Network configuration
•
Configuring the internal interface
•
Configuring the external interface
•
Configuring the management interface (Transparent mode)
•
Setting DNS server addresses
•
Configuring routing
•
Adding routing gateways
•
Adding a default route
•
Adding routes to the routing table
•
Configuring the routing table
•
Enabling RIP server support
•
Adding routes (Transparent mode)
•
Providing DHCP services to your internal network
•
System configuration
•
Setting system date and time
•
Changing web-based manager options
•
Adding and editing administrator accounts
•
Configuring SNMP
System status
If you log into the web-based manager using the admin administrator account, you can go to System > Status
to make any of the following changes to the system settings.
•
Upgrading the DFL-500 NPG firmware
•
Backing up system settings
•
Restoring system settings
•
Restoring system settings to factory defaults
•
Changing to Transparent mode
•
Changing to NAT/Route mode
•
Restarting the DFL-500 NPG