Dimplex Electric Fireplace DFG3033 - Manual (Page 17)

17
Maintenance
Light Bulb Replacement
Allow at least five (5) minutes for
light bulbs to cool before touching
bulbs to avoid accidental burning
of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame. There are three (3)
bulbs under the ember bed, which
generate the flames and embers,
and two (2) bulbs above that
illuminate the firebox interior.
Lower Light Bulb Requirements
Quantity of three (3) clear
chandelier or candelabra bulbs
with an e-12 (small) socket base,
60 Watt rating. Example: GE
60bc or philips 60 cTc.
Do not exceed 60 Watts per
bulb.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.
To access the lower light bulb
area:
①
Carefully remove the front
glass assembly. be aware that
some of the glass media may fall
out of the tray (Figure 9).
Upper bulbs
②
Empty the tray of glass media.
CAUTION: handle glass
media with care as some
pieces may have sharp edges.
③
Lift the tray up and remove
from firebox.
④
pull flicker rod towards the
motor and bend gently to remove
Figure 9
Flicker rod
Glass media
and tray
Front Glass
Assembly