Dimplex Electric Fireplace DFG3033 - Manual (Page 13)

13
Operation
On/Off button on the remote
control transmitter.
⑥
Release the Initialization
button on the unit.
⑦
Press the Flame/heat On/Off
button to turn the Flame/heat
function on.
Frequency Interference
if the fireplace does not respond
properly to the remote control,
the remote operating frequency
may have to be reset. The
remote control can send another
frequency code to the circuit
board to eliminate interference.
①
Simultaneously press the
“ Temperature Down” button and
the “ Flame Speed Down” button
on the remote control (Figure 7).
②
“ COD” will appear in place of
the sleep timer digits.
③
Release the “ Temperature
Down” button and the “Flame
Speed Down” button.
④
press the initialization button
on the unit (Figure 5C).
⑤
Press the Flame/heat On/Off
button button on the remote.
Your remote will now have a
different frequency
communicating with the fireplace.