Dimplex Electric Fireplace DFG3033 - Manual (Page 10)

10 www.dimplex.com
Fireplace Installation
⑦
Connect the white wire
(neutral) from the unit to the white
wire from power supply
(Figure 3).
⑧
Connect the green wire
(ground) from the unit to the
green wire from power supply
(Figure 3).
⑨
Place all connectors inside
the unit and secure the junction
box cover to unit. Ensure that the
cable clamp grips only the jacket
of service cable.
CAUTION: Clearance for
air circulation beneath the
fireplace insert is provided by
two (2) rubber feet.
Do not install the fireplace
insert directly on carpet or
similar surfaces which may
restrict air circulation.
if installing the fireplace in a
carpeted area, place a one-
piece, solid, flat surface under
the fireplace insert. ensure
that both of the insert’s feet
rest securely on this surface.
Final Steps
Carefully pour and evenly
distribute the supplied glass rock
media on the front tray of the
firebox (Figure 4). once complete,
hang the front glass assembly on
the mounts of the firebox.
Fireplace
Junction
box
White wire (N)
black wire (l)
Green wire (G) Green wire (G)
black wire (l)
White wire (N)
120 v power
Supply
(breaker panel)
Figure 4
Front glass
Mounts
hooks