Dimplex Electric Fireplace DFG3033 - Manual (Page 12)

12 www.dimplex.com
Remote Control
The remote control has a range of
approximately 50 feet (15.25 m),
it does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with 243
independent frequencies to
prevent interference with other
units.
Battery Installation
①
Depress tab on the battery
cover on the back of the remote
transmitter and remove battery
cover (Figure 6).
Operation
④
Replace the battery cover.
!
NOTE: When the “bAT”
symbol is present on
the remote control it is
recommended to replace the
batteries promptly, to maintain
full functionality of the remote/
fireplace. The remote
transmitter has a battery
backup time of only several
hours.
Initializing the Remote
Control
①
plug cord into 120 volt wall
outlet.
②
Ensure the Main On/Off
Switch located in the switch box
on the fireplace in the upper
right hand corner is in the ON
position (Figure 5A).
③
Set the 3 Position Manual
control (Figure 5b) to the
Remote position (left position).
④
Press and hold the
initialization button on the unit
(Figure 5C).
⑤
While holding the Initialization
button, press the Flame/Heat
Figure 6
batteries
Child Lock
②
Install two (2) AAA batteries
into the remote control (included).
③
Ensure child lock is in the
“unlocked” position (Figure 6).