Guralp Systems CMG-EDU User Manual
Page 5
Operator's guide
•
the GPS unit with attached data cable;
•
a blue power/data cable;
•
a calibration and installation sheet, and
•
this manual.
You will need to provide your own 12–24 V DC power supply, and a
Windows or Linux PC for recording the data.
1.1.1
Handling notes
Although the CMG-EDU is relatively rugged, it can be damaged if
mishandled.
•
Do not bump, kick or drop the sensor.
•
Do not kink or walk on the data cable, nor allow it to bear the
weight of the sensor.
•
Do not ground either of the signal lines from the instrument.
If any component is missing or appears damaged, contact Güralp
Chapter 6, “Troubleshooting and help”
.)
October 2005
5