Guralp Systems CMG-EDU - Manual (Page 11)

Operator's guide
3 Viewing data with Scream!
You can use Güralp Systems' Scream! software to view incoming
seismic data, record it, and play events back later. Windows and Linux
versions of Scream! are freely available from Güralp Systems.
3.1 The main window
When you start Scream!, you will be shown an empty main window:
Scream! is now ready for you to start adding data sources.
3.2 Serial ports
1. Select File Setup... → . If the Com Ports tab is not visible, bring it
to the front.
If you are running Scream! for the first time, it will
automatically bring up this window, together with a short
tutorial.
October 2005 11