Gullco GK-200-RLx-A - Manual (Page 18)

16
ACCESSORIES
GK-191-P-071
Arc Signal Relay Kit
Additional Arc Signal Relay kits can be installed on the “KAT”
®
carriage
to provide multiple isolated relay signals (generated by the GSP control
during automated welding cycles), to the trigger input of multiple welding
power units.
GK-190-067
Lower Housing Dust
Cover (Rigid “KAT”
®
)
A cover which is installed to a rigid “KAT”
®
carriage lower housing,
reducing the drive opening to minimize dust & smoke pollutions to the
interior of the “KAT”
®
carriage.
GK-190-068
Lower Housing Dust
Cover (Flex “KAT”
®
)
A cover which is installed to a Flex “KAT”
®
carriage lower housing,
reducing the drive opening to minimize dust & smoke pollutions to the
interior of the “KAT”
®
carriage.
GK-166-169
Low Speed Gear
Assembly (Rigid “KAT”
®
)
An external gear assembly is available which can easily be fitted to any
of the rigid track “KAT”
®
carriages to decrease the available speed
range.
GK-166-153
High Speed Gear
Assembly (Rigid “KAT”
®
)
An external gear assembly is available which can easily be fitted to any
of the rigid track “KAT”
®
carriages to increase the available speed range.
Other Accessories:
The Gullco AutoWeld “KAT”
®
carriage is drilled to facilitate the mounting of rack boxes and rack box
riser brackets, cable support brackets, as well as links for towing idler carriages. Many other
accessories such as remote controls, oscillation, seam tracking, auto indexing, auto stitch welding,
and automatic overlaying are also available for fitting to the “KAT”
®
all position, variable speed
travel carriage.
Visit Gullco’s web site, “ www.gullco.com ”
to see, or request, more product and
application information.